TALON portable power node
A Tailorable Assured-Load Operational Node: 30 kW of battery-first power in a JMIC-sized package, set up in about 30 minutes, carried internally by MV-22 and handled with the forklift you already have.
SPECIFICATIONS
Small footprint, expandable storage.
| Specification | TALON |
|---|---|
| Continuous output | 30 kW |
| Battery storage, baseline | 60 kWh |
| Battery storage, expanded | up to 300 kWh |
| Footprint | JMIC-sized (Joint Modular Intermodal Container envelope) |
| Setup or relocation | about 30 minutes |
| Handling | Four-way forklift pockets; tie-down provisions for air and surface movement |
| Air transport | MV-22 internally transportable; ramp-loaded on roller rails |
| Operation | Battery-first, silent-watch |
*Specifications subject to change
SILENT WATCH
Power without the generator running.
TALON carries the load from storage by design; generation recharges the battery rather than feeding the load. Long periods with no engine running mean no exhaust heat, no acoustic signature and no fuel burn at the point of use — the conditions a fixed generator cannot offer a command post or a sensor site that has to stay unnoticed.
The same architecture changes the logistics behind the node. Fewer generator hours mean fewer fuel movements to the position and less exhaust to manage inside a shelter or a vehicle. Storage expands in increments to 300 kWh, so one node supports a communications detachment for a night or a command post for days; modules connect without special tools and swap as a unit.
TRANSPORT AND HANDLING
Sized to the JMIC. Moved like one.
TALON is built to the Joint Modular Intermodal Container envelope, so it moves through the same aircraft, vehicles and handling equipment as the supplies it travels with. No special lift, no special crew.
MV-22 internal load
Ramp-loaded on the aircraft's roller rails and restrained at the cabin tie-down points.
Four-way forklift pockets
Lift and place from any side with a standard forklift or rough-terrain handler. Positioning at the site takes minutes and needs no crane.
Tie-down ready
Restraint points on the frame for air and surface movement, so the node rides secured in an aircraft, on a flatbed or in a container without a custom cradle.
APPLICATIONS
Built for loads that move.
C2 and communications nodes · Expeditionary basing · Sensor and radar sites · Contested logistics · Uncrewed-systems (UxV) support · Emergency operations · Training and range support
A 30-minute capability briefing covers your load, site and timeline, and ends with a recommended configuration and a delivery window. Request a capability briefing